Dual-Lobe/Zero-Torque models provide an ideal combination of benefits for the problems associated with trailer and container door securement. The dual-lobe provides “ice breaker action” applying more leverage that frees frozen (stuck) door seals regardless of door thickness.
Powerbrace Zero-Torque lockrods:
- offer positive anti-rack control in all directions
- are designed to cancel out the reverse-leverage action resulting from a load pushing against the door
- provide maximum leverage to close the doors
- provide secure closure because the more load against the door from the inside, the tighter the lockrod engages
- allow controlled opening of the door
- provide icebreaker action to give leverage to open frozen doors
Zero-Torque cams (with matching keepers) provide positive anti-rack control in every direction. This braces the whole rear structure and acts as an additional body member against damage by racking forces.
With Zero-Torque, a person can easily cope with excessive pressure due to shifted cargo against the door mechanism.
Models
Theft Deterrent Models
This security option provides a way to secure the door seal directly at the cam and keeper, instead of at the lockrod handle.
Requires only one Secura-Cam/Keeper assembly per end-frame.
Keepers for Dual-Lobe Zero Torque Lockrod Models
| DL,CT,SK Keepers | Plain | Hot-Dip Galvanized | Stainless |
|---|---|---|---|
| 0" - Weld-On | P10641 | P10645 | P10647 |
| 0" - Weld-On | P10641 | P10645 | P10647 |
| 0" - Weld-on with drain hole | P10648 | - | - |
| 0" - Bolt-on | - | P44685 | - |
| 0" - Weld-on Secura-Keeper* | P41431 | P41435 | - |
| 0" - Bolt-on Secura-Keeper* | - | P44675 | - |
| NH Keepers | Plain | Hot-Dip Galvanized | Stainless |
|---|---|---|---|
| 0" - Weld-On | P41401 | P41405 | P41407 |
| 0" - Weld-On with drain hole | P41408 | - | - |
| 0" - Bolt-on | - | P43745 | - |
*For Secura Cam/Keepers security systems, SC model cam end required
Each model offers maximum reach and gather to square racked end-frames and/or warped doors and provides opening leverage to free frozen or stuck doors or overcome stiff or frozen (stuck) seals.
• Long reach cam ends allow contact with keepers 2-1/4-inches away from lockrod centerline.
• Mating sloped surfaces of cams and keepers gather and “square-up” the door panels within the door opening, while providing positive anti-rack protection.
• Both cam end tips and keeper surfaces are rounded to assure an easy, smooth entry and engagement.
Should standard models not meet your needs you can use any reach and gather model combination to meet your specific application needs.
Examples of possible alternate combinations – HV-HV, QF-SH, QF-ST, NS-SH, etc.
Keeper Height: 2.25″.
Keepers for Reach and Gather Lockrod Models
| HV Keepers | Plain | Hot-Dip Galvanized | Stainless |
|---|---|---|---|
| 0" - Weld-On | P42231 | P42235 | P42237 |
| 0" - Bolt-On | P42961 | P24965 |
| SH Keepers | Plain | Hot-Dip Galvanized | Stainless |
|---|---|---|---|
| 0" - Weld-On | P41551 LH Top/RH Bot | P41555 LH Top/RH Bot | P41557 LH Top/RH Bot |
| P41561 LH Top/RH Bot | P41565 LH Top/RH Bot | P41567 LH Top/RH Bot |
| NS Keepers | Plain | Hot-Dip Galvanized | Stainless |
|---|---|---|---|
| 0" - Weld-On | P42241 | P42245 | P42247 |
| ST Keepers | Plain | Hot-Dip Galvanized | Stainless |
|---|---|---|---|
| 0" - Weld-On | P42291 LH Top/RH Bot | P42295 LH Top/RH Bot | P42297 LH Top/RH Bot |
| P42301 LH Top/RH Bot | P42305 LH Top/RH Bot | P42307 LH Top/RH Bot |
| QF Keepers | Plain | Hot-Dip Galvanized | Stainless |
|---|---|---|---|
| 0" - Weld-On | P42371 | P42375 | P42377 |
Eliminate the hassle of fabricating lockrods from components.
- All Intermodel components are exact replacements for the component they replace.
- Save valuable time and money utilizing the Powerbrace factory assembled lockrod option.
- Universal design works as LH or RH depending on handle placement, allowing for the repair of virtually any container.
- Comes in lengths for 8’6″ (lockrod P152901) and 9’6″ (lockrod P152865) containers.
Stainless Steel
